-
Class 100 Vertical Air Flow Clean Bench
Open loop air circulation is as follows, the main feature is that in each cycle all the air is collected from the outside through clean bench box and returned to the atmosphere directly. The general horizontal flow super-clean working table adopts the opening loop, this kind of clean bench structure is simple, cost is low, but the fan and filter load are heavily, it has a bad effect on using life, at the same time the cleaning efficiency of fully open air circulation is not high, usually only for low cleanliness requirements or biological hazards environment.
-
Bottom Replacement Terminal HEPA Filter Module
Lightweight, compact ducted filter module for clean processes or medical suites.
-
Terminal HEPA filter housing for ceiling installation
Terminal HEPA Filter Housing for Ceiling Installation is a compact, high-efficiency air filtration unit designed for cleanroom, healthcare, and laboratory environments. It features a sturdy, leak-proof construction with a pre-filter and HEPA/ULPA filter to ensure ≥99.97% particle removal at 0.3μm. The housing is compatible with standard ceiling grids, allowing seamless integration into HVAC systems while maintaining low airflow resistance.
-
Fan Filter Unit Chemical Filter
Composite carbon cloth structure.
The uniformity of wind speed is good, and the ability of adsorption and decomposition is strong.
-
Pass Box
Used for the transfer of small items between clean areas or between clean areas and non-clean areas.
-
FAF single person air shower room for clean room
People need special passages to enter and exit the dust-free workshop. The air shower room is the only passage for personnel to enter and exit. It is used to isolate clean areas and non-clean areas.
The area of clean rooms varies. The single person air shower room is designed specifically for small-area clean rooms.
Occupies less space and has the same functions as other large air showers
-
FAF Clean Workbench ISO 5
ISO 5 standard, efficiency: 99.97%;
Low noise, 52-56 dB;
With disinfection and sterilization function;
Stainless steel housing, corrosion resistant;
EBM motor from Germany, lower energy consumption.
-
Activated carbon chemical FFU factory wholesale
FFU (Fan Filter Unit) is an efficient air filtration device with a built-in fan, mainly used in clean rooms, laboratories, semiconductor production lines, pharmaceutical production and other environments that require extremely high air cleanliness.
-
FAF High Efficiency HEPA Filter Terminal Box Terminal Duffusers for Clean room
High-efficiency air supply is the ideal terminal filtration device for various levels of purified air-conditioning systems, which can be widely used in purified air-conditioning systems of medicine, health, electronics, chemical industry, etc.
The air supply contains 4 pieces (box, diffuser, high-efficiency filter, air valve).
The high-efficiency air supply outlet contains 4 sets (box, diffuser, high-efficiency filter, air valve).
The interface can be top and side air duct.
-
Auto Air Shower of Clean Room
To use the high-speed clean air to blow off the dust that enters the cleanroom personnel’s surface.
As cleanroom equipment, installed in the clean room entrance and used to remove the dust on personnel or goods entering through it.
The principle of the Auto air shower
To use the high-speed clean air to blow off the dust on workers into the clean room.
Usually installed in the clean room entrance and used to remove the dust through air shower system. -
++DC FFU Fan Filter Unit for Clean Room
A Fan Filter Unit (FFU) is a self-contained air filtration system that is commonly used in cleanroom environments to remove contaminants from the air. It typically consists of a fan, a filter, and a motorized impeller that draws in air and passes it through the filter to remove particles. FFUs are commonly used to create positive air pressure in cleanrooms, and are also used in other applications that require clean air, such as in healthcare facilities and laboratories.
-
Replaceable HEPA Box Filter for Cleanrooms
The Replaceable HEPA Box Filter is a modular filtration unit designed for ISO Class 1-8 cleanrooms, offering ultra-low particle penetration and easy maintenance. This system integrates a standardized HEPA/ULPA filter cartridge within a durable housing, enabling quick replacement without disrupting cleanroom operations.
