FAF Products
Salt spray removing HEPA Filter Box Type
I. Product Introduction
This air filter is used in the offshore oil and gas resource development equipment such as drilling platform, production
platform, floating production oil storage vessel and also used in the precision instrument room, such as unloading vessel,
lifting vessel, pipe laying vessel, submarine trench vessel, diving vessel,r Marine ships,wind power generation, sea
technology and equipment engineering operations.
Composition materials and operating conditions
1,Frame: SUS316, black plastic U-shaped groove.
2,Protective net:316 stainless steel , white powder-coated
3, Filter Media: Glass fiber filter media with removing salt spray performance l.
4,Splitter: environmental-friendly hot melt glue and Aluminum foil
5, Sealant: Environmentally friendly polyurethane AB sealant,EVA gaskets
II. Product Advantages
1, large air flow, Very low resistance, Excellent ventilation performance.
2, small to take up the space,it is suitable for small precision cabinet equipment.
3. Large filtration area, large dust holding capacity, Long service life, Excellent filtration accuracy and effect.
4.The Air filter media adding chemical material, which can filter not only dust particles but also gaseous pollutants in the Marine climate environment.
III. Product Parameters
Common product specifications, models, and technical parameters
| Model | Size | Air Flow(m³/H） | Initial Resistance(Pa) | Efficiency | Media |
| FAF-SG-W28 | 610*610*292*4V | 2800 | 200(Pa) | H13/H14 | Glass fiber for removing salt sprey |
| FAF-SG-W14 | 305*610*292*4V | 1400 | |||
| FAF-SG-W60 | 800*800*292*4V | 6000 |
Note:This product is acceptable to non-standard customizatinon
IV. Product Applications
1. Marine & Offshore Industries
2. Coastal & Tropical HVAC Systems
3. Industrial & Chemical Processing
4. Transportation & Infrastructure
5. Specialized Military & Defense
V.FAQ
Q: How often should filters be replaced in high-salt environments?
A: Every 3–6 months (vs. 12+ months in normal conditions) due to accelerated particle loading.
Q: Can it filter other corrosive gases (e.g., SO₂)?
A: Yes, when paired with an activated carbon layer for chemical adsorption.
Q: Is it suitable for hurricane-prone areas?
A: Absolutely – Designed to handle high humidity + saltwater mist during storms.
